1
2
CXO7589
Figure 29 Raising a l eveler foot
1. H ex n ut
2. Leveler foot
3. Carefully move the rack to the installation area and position it to provide the necessary service
areas (see Figure 28).
Tostabilizetherackwhenitisinthefinal installation location:
1. Use a wrenc
h to lower the foot by turning the leveler foot hex nut clockwise until the caster does
not touch
the floor. Repeat for the other feet.
2. After lowering the feet, check the rack to ensure it is stable and level.
3. Adjust the feet as necessary to ensure the rack is stable and level.
HP StorageWorks 3000/5000 Enterprise Virtual Array user guide (VCS 4.xxx)
83
Comments to this Manuals