HP D8C84UT#ABA User Manual download pdf (Page 23)

Computer Setup—Advanced

NOTE: Support for specific Computer Setup options may vary depending on the hardware

configuration.

Table 3-5 Computer Setup—Advanced

Option Heading

Power-On Options Allows you to set:

● POST messages (enable/disable). Suppresses most POST messages, such as memory

count, product name, and other non-error text messages. If a POST error occurs, the error is

displayed regardless of the mode selected.

● After Power Loss (off/on/previous state): Setting this option to:

◦

Off—causes the computer to remain powered off when power is restored.

◦

On—causes the computer to power on automatically as soon as power is restored.

◦ Previous state—causes the computer to power on automatically as soon as power is

restored, if it was on when power was lost.

NOTE: If you turn off power to the computer using the switch on a power strip, you will not be

able to use the suspend/sleep feature or the Remote Management features.

● POST Delay (None, 5, 10 15, 20, or 60 seconds). Enabling this feature will add a user-

specified delay to the POST process. This delay is sometimes needed for hard disks on

some PCI cards that spin up very slowly, so slowly that they are not ready to boot by the time

POST is finished. The POST delay also gives you more time to select F10 to enter Computer

(F10) Setup.

BIOS Power-On Allows you to set the computer to turn on automatically at a time you specify.

Onboard Devices Allows you to set resources for or disable Legacy devices.

Computer Setup (F10) Utilities 15

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 159 160

No comments

HP D8C84UT#ABA User Manual Page 23