HP D8C84UT#ABA User Manual download pdf (Page 53)

3. Rotate up the drive bay housing to access the memory module sockets on the system board.

Figure 7-6 Rotating the Drive Cage Up

4. Open both latches of the memory module socket (1), and insert the memory module into the

socket (2).

Figure 7-7 Installing a DIMM

NOTE: A memory module can be installed in only one way. Match the notch on the module

with the tab on the memory socket.

A DIMM must occupy the black XMM1 socket.

For maximum performance, populate the sockets so that the memory capacity is equal between

Channel A and Channel B. Refer to

Populating DIMM Sockets on page 44 for more information.

5. Push the module down into the socket, ensuring that the module is fully inserted and properly

seated. Make sure the latches are in the closed position (3).

Installing Additional Memory 45

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 159 160

No comments

HP D8C84UT#ABA User Manual Page 53