Hp LaserJet M4345 Multifunction Printer series User Manual Page 215

  • Download
  • Add to my manuals
  • Print
  • Page
    / 296
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 214
2. Pull up on the document-feeder-cover-release lever, and open the document feeder cover.
Carefully remove any jammed media.
3. Lift the green jam lever on the document guide, and then check for jammed media. Carefully
remove any jammed media.
4. Close the document feeder cover.
5. If a jam message persists, jammed media is still in the device. Look for the jam in another
location.
Solve repeated jams
Situation Solution
General repeated jam problems 1. Make sure that the media is loaded correctly in the trays and that all width
guides are set correctly (see
Load media).
2. Make sure that the tray is set for the size of media that is installed and that
the tray is not overloaded.
3. Try turning over the stack of media in the tray. If you are using prepunched
or letterhead paper, try printing from tray1.
4. Do not use media that has been printed on previously or torn, worn, or
irregular media. See
Select print media.
5. Check the media specifications. (See
Select print media.) If media is outside
of the recommended specifications, problems can occur.
ENWW Clear jams 203
Page view 214
1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 295 296

Comments to this Manuals

No comments