Hp LaserJet 9000 Printer series User Manual download pdf (Page 151)

Chapter 5 Problem solving 151

Correcting output quality problems

Communicating with an optional HP Jetdirect print server

If the printer contains an optional HP Jetdirect internal print server, and you cannot communicate with the

printer over the network, verify the operation of the print server. Check the Jetdirect Configuration Page for the

message I/O CARD READY. (To print a configuration page, press 22 for five seconds while the printer is idle.)

For troubleshooting information, see the HP Jetdirect administrator’s guide.

HP Jetdirect 610N 10/100TX Print Server

If the printer contains an optional HP Jetdirect 10/100TX print server, check to see that the print server was

able to link to the network. (If you have a different HP Jetdirect print server, see the guide that came with it.)

z Check the link-speed indicators (10 or 100) on the print server. If both are off, the printer server failed to

link to the network.

z Check the HP Jetdirect configuration page. The message LOSS OF CARRIER ERROR indicates that the print

server failed to link to the network.

The HP Jetdirect 10/100TX print server might require up to 10 seconds to establish a link to the network. If the

print server failed to link, verify that all cables are correctly connected. If all cables are correctly connected,

but the print server still fails to link, follow the steps below to reconfigure the print server:

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 249 250

No comments

Hp LaserJet 9000 Printer series User Manual Page 151