HP STORAGEWORKS e1200-160 User Manual download pdf (Page 65)

Visual Manager User Interface

65Network Storage Router e1200-160

Mapping Menu

Each physical port/bus on the router can have the following maps:

Note: Port 0 Device Map is the HP recommended map to be used for editing and

assigning oncoming hosts. The Indexed (default) map should not be used for editing,

even though the user is able to edit this map.

Each map has a unique name and map ID; one of the maps must be identified as

the “current” map for the router to use.

Accessed from the Main Menu, the Mapping Menu is used to view and modify

host and map information for a Fibre Channel port or SCSI bus. Maps and hosts

can be added, edited, or deleted.

To view or change map settings of a specific port or bus:

1. Select the port or bus from the menu bar on the left side of the screen or from

the router image at the top of the screen.

Specific mapping information is displayed, including the name of the port, the

selected host, and the assigned map.

2. To make changes to the configuration, enter the new value and then select

Submit.

Because some mapping configuration settings are the same for Fibre Channel and

SCSI maps and some settings are unique, this mapping section is subdivided as

follows:

■ Common Fibre Channel and SCSI Mapping Tasks, page 66

■ Fibre Channel Mapping Tasks, page 67

■ SCSI Mapping Tasks, page 71

Table 5: Device Map Types

Map Type System/User Generated Fibre Channel or SCSI

Auto Assigned System Fibre Channel and SCSI

Indexed (default) System Fibre Channel and SCSI

Port <0> Device System Fibre Channel

SCC System Fibre Channel

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 199 200

No comments

HP STORAGEWORKS e1200-160 User Manual Page 65