HP HSR6600 Installation Manual download pdf (Page 87)

Model

Central

wavelen

Connector

Fiber type

Max. transmission

distance

SFP-XG-LH40-SM155

1550 nm LC 9/125m single mode 40 km (24.86 miles)

Flexible interface platform modules

The HSR6600 Router Series supports flexible interface platform (FIP) modules FIP-10 and FIP-20. You can

install High-speed Interface Modules (HIMs) and Multifunctional Interface Modules (MIMs) on a FIP to

support different network services as needed. A FIP module is located on the lower part of the front

panel.

NOTE:

No FIP modules are supplied with the router. Purchase them yourself.

FIP-10

The FIP-10 supports only MIMs, and you can plug at most four MIMs into a FIP.

Figure 71 FIP-10 front panel

(1) Slot 4 (2) Slot 3

(3) OPEN BOOK mark (4) Status LED (RUN)

(5) Slot 1 (6) Slot 2

The OPEN BOOK mark indicates that the operator must read the following sections before working with

the FIP:

Table 37 References for FIP operations

eration Reference

Install and remove the FIP See “Installing a FIP module” and “Replacing a FIP module.”

Install and remove MIMs See “Installing a HIM/MIM” and “Replacing a HIM/MIM.”

Connect network cables See “Connecting an Ethernet cable.”

Connect optical fibers See “Connecting a fiber cable.”

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 106 107

No comments

HP HSR6600 Installation Manual Page 87