HP HSR6600 Installation Manual Page 67
- Page / 107
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
61
• When the system is over-temperature. In this case, the system displays the following output:
%Dec 7 11:17:01:436 2011 HP DRVMSG/3/TEMP_ALARM:
CPU temperature is greater than alarm upper limit in slot 0, index is 0.
To solve the problem, check the output (such as the system temperature, insufficient available power, and
PCB voltage alarms) on the serial terminal and the software management tool.
If the cause cannot be located in the steps above and the problem persists, record the above information,
and contact your local sales agent.
Table 20 Router status LED description
LED Status Remarks
PWR1 (red/green)
Off The power module is not in position.
Steady green The power module is supplying power properly.
Steady red
No power is input or the power module is faulty
when PWR2 is operating properly.
PWR2 (red/green)
Off The power module is not in position.
Steady green The power module is supplying power properly.
Steady red
No power is input or the power module is faulty
when PWR1 is operating properly.
FAN (red/green)
Off No power is input or the fan tray is not is position.
Steady green The fan tray is operating properly.
Steady red The fan tray is faulty.
ALM (red)
Steady on No alarm exists.
Off
The router is faulty. You need to view the system
logs immediately.
RUN (green)
Off No power is input or the router is faulty.
Flashes at 1 Hz The router is operating properly.
Flashes at 8 Hz The router is loading software or has not started.
FIP module failure
If the RUN LED of the FIP module is off, it indicates that the FIP module is powered off or faulty.
To troubleshoot the FIP module failure:
1. Check whether the router is powered on.
2. If the router is powered on, check whether the FIP module is plugged in a right slot.
3. If the FIP module is plugged in a right slot, it indicates that the FIP module is faulty. Contact your
local sales agent.
Power module failures
If the router cannot be powered on and the power LED on the front panel is off, it indicates that the power
module is faulty.
- HP HSR6600 Routers 1
- Contents 3
- Preparing for installation 7
- Electricity 8
- Laser safety 8
- Router moving 8
- Weight support 8
- Temperature and humidity 9
- Altitude 9
- Cleanness 9
- Cooling system 10
- ESD prevention 10
- Lightning protection 12
- Power supply 12
- Accessories 13
- Installing the router 14
- Unpacking the router 15
- Grounding the router 17
- Grounding cable 18
- Installing a power module 19
- Installing a FIP module 19
- Installing a HIM/MIM 20
- Installing a CF card 21
- Connecting the power cord 22
- Connecting the AUX cable 24
- Connecting an Ethernet cable 25
- Connecting a fiber cable 27
- Fiber cable overview 28
- Connecting an E1/T1 cable 31
- Connecting a T1 cable 33
- Connecting a CE3/CT3 cable 34
- Overview 35
- Login methods 39
- Setting terminal parameters 40
- Verification before power-on 43
- Powering on the router 43
- HP A6600 Routers 44
- Configuration Guides 44
- Configuring basic settings 45
- Replacement procedures 47
- Replacing a FIP module 48
- Replacing a HIM/MIM 48
- Replacing a CF card 49
- Replacing a fan tray 51
- Replacing a memory module 52
- Memory module structure 53
- Power 1 State: Absent 60
- Power 2 State: Normal 60
- Solving system faults 63
- Rebooting the router 64
- Troubleshooting 66
- FIP module failure 67
- Power module failures 67
- Fan failures 68
- HIM/MIM failures 69
- Dealing with password loss 70
- 1. Reboot the router 71
- EXTEND-BOOTWARE menu 72
- Cooling system failure 75
- Software upgrade failures 76
- FTP upgrade failure 77
- Booting App fails! 78
- Chassis views 79
- Dimensions and weights 80
- Storage media 81
- Power consumption 81
- Power module 81
- DC power module 82
- Fan tray 83
- Port specifications 84
- Management Ethernet port 85
- Combo interface 85
- 10 Gbps Ethernet port 86
- Interface modules 89
- Appendix B LEDs 90
- FIP LEDs 93
- HIM/MIM LEDs 94
- Power module LEDs 94
- Appendix C Cable management 95
- Cable management guidelines 96
- Cable routing example 98
- Figure 83 Routing cables 99
- Slot arrangement 100
- Slot arrangement for FIPs 100
- Numbering interfaces 101
- Examples 101
- • GigabitEthernet 1/2/2 102
- • GigabitEthernet 1/2/3 102
- Support and other resources 103
- Conventions 104
- Network topology icons 105
- Port numbering in examples 105
- A C D E F G H I L N P R S U 106
Related products and manuals for Network equipment chassis HP HSR6600
(58 pages)© 2020, manymanuals.com. All rights reserved. | 0.920 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals