HP HSR6600 Installation Manual download pdf (Page 11)

• Touch only the edges, instead of electronic components when observing or moving a removed

memory module, CF card, HIM, or MIM.

To use the ESD-preventive wrist strap, perform the following steps:

1. Wear the wrist strap on your wrist.

2. Lock the wrist strap tight around your wrist to keep good contact with the skin.

3. Attach the ESD-preventive wrist strap to the alligator clips.

4. Attach the alligator clips to the rack post.

5. Make sure that the rack is well grounded.

CAUTION:

• Check the resistance of the ESD-preventive wrist strap for safety. The resistance readin

should be in the

range of 1 to 10 megohm (Mohm) between human body and the ground.

• The HSR6600 does not provide any ESD-preventive wrist strap. Prepare it yourself.

Figure 2 Use an ESD-preventive wrist strap

(1) ESD-preventive wrist strap (2) Lock

(3) Alli

ator clip

EMI

All electromagnetic interference (EMI) sources, from outside or inside of the router and application system,

adversely affect the router in a conduction pattern of capacitance coupling, inductance coupling,

electromagnetic wave radiation, or common impedance (including grounding system) coupling. To

prevent EMI, perform the following tasks:

• Take measures against interference from the power grid.

• Do not use the router together with the grounding equipment or light-prevention equipment of

power equipment, and keep the router far away from them.

• Keep the router far away from high-power radio launchers, radars, and equipment with high

frequency or high current.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 106 107

No comments

HP HSR6600 Installation Manual Page 11