HP HSR6600 Installation Manual Page 73
- Page / 107
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
67
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): 6
After the configuration skipping flag is set successfully, the following message appears:
Flag Set Success.
2. When the EXTEND-BOOTWARE menu appears again, enter 0 to reboot the router.
The router starts up with empty configuration.
3. To use the configuration in the next-startup configuration file, load the file in system view.
<HP> system-view
[HP] configuration replace file startup.cfg
Current configuration will be lost, save current configuration? [Y/N]:n
Info: Now replacing the current configuration. Please wait...
Info: Succeeded in replacing current configuration with the file startup.cfg.
4. Configure a new console login password.
In the following example, the console login authentication mode is password and the authentication
password is 123456. For security, the password is always saved in ciphertext to the configuration file,
regardless of whether you specify the simple keyword or cipher keyword for the set authentication
password command.
<HP> system-view
[HP] user-interface console 0
[HP-ui-console0] authentication-mode password
[HP-ui-console0] set authentication password cipher 123456
5. To make the settings take effect after a reboot, save the running configuration to the next-startup
configuration file.
[HP] save
Dealing with user privilege level password loss when password
recovery capability is enabled
1. Reboot the router to access the EXTEND-BOOTWARE menu, and then enter 8.
The current mode is password recovery.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
- HP HSR6600 Routers 1
- Contents 3
- Preparing for installation 7
- Electricity 8
- Laser safety 8
- Router moving 8
- Weight support 8
- Temperature and humidity 9
- Altitude 9
- Cleanness 9
- Cooling system 10
- ESD prevention 10
- Lightning protection 12
- Power supply 12
- Accessories 13
- Installing the router 14
- Unpacking the router 15
- Grounding the router 17
- Grounding cable 18
- Installing a power module 19
- Installing a FIP module 19
- Installing a HIM/MIM 20
- Installing a CF card 21
- Connecting the power cord 22
- Connecting the AUX cable 24
- Connecting an Ethernet cable 25
- Connecting a fiber cable 27
- Fiber cable overview 28
- Connecting an E1/T1 cable 31
- Connecting a T1 cable 33
- Connecting a CE3/CT3 cable 34
- Overview 35
- Login methods 39
- Setting terminal parameters 40
- Verification before power-on 43
- Powering on the router 43
- HP A6600 Routers 44
- Configuration Guides 44
- Configuring basic settings 45
- Replacement procedures 47
- Replacing a FIP module 48
- Replacing a HIM/MIM 48
- Replacing a CF card 49
- Replacing a fan tray 51
- Replacing a memory module 52
- Memory module structure 53
- Power 1 State: Absent 60
- Power 2 State: Normal 60
- Solving system faults 63
- Rebooting the router 64
- Troubleshooting 66
- FIP module failure 67
- Power module failures 67
- Fan failures 68
- HIM/MIM failures 69
- Dealing with password loss 70
- 1. Reboot the router 71
- EXTEND-BOOTWARE menu 72
- Cooling system failure 75
- Software upgrade failures 76
- FTP upgrade failure 77
- Booting App fails! 78
- Chassis views 79
- Dimensions and weights 80
- Storage media 81
- Power consumption 81
- Power module 81
- DC power module 82
- Fan tray 83
- Port specifications 84
- Management Ethernet port 85
- Combo interface 85
- 10 Gbps Ethernet port 86
- Interface modules 89
- Appendix B LEDs 90
- FIP LEDs 93
- HIM/MIM LEDs 94
- Power module LEDs 94
- Appendix C Cable management 95
- Cable management guidelines 96
- Cable routing example 98
- Figure 83 Routing cables 99
- Slot arrangement 100
- Slot arrangement for FIPs 100
- Numbering interfaces 101
- Examples 101
- • GigabitEthernet 1/2/2 102
- • GigabitEthernet 1/2/3 102
- Support and other resources 103
- Conventions 104
- Network topology icons 105
- Port numbering in examples 105
- A C D E F G H I L N P R S U 106
Related products and manuals for Network equipment chassis HP HSR6600
(58 pages)© 2020, manymanuals.com. All rights reserved. | 0.502 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals