HP HSR6600 Installation Manual download pdf (Page 50)

Figure 56 Pull the CF card

3. To install a new MIM, see “Installing a CF card.”

NOTE:

To protect the CF card, place it into an antistatic bag.

Replacing a transceiver module

NOTE:

hen replacin

a transceiver module, make sure that the two transceiver modules connected by the same

optical fiber have the same wavelength.

To replace a transceiver module:

1. Remove the optical fibers from the transceiver module.

2. Pivot the clasp down to the horizontal position.

3. Holding the handle of the transceiver module, gently pull the transceiver module out. See Figure

57.

4. Insert th

e plastic plug to the removed transceiver module, and put the transceiver module into its

original shipping materials.

5. If you do not install a new transceiver module in the interface, install a dust-proof plug in the

interface. To install a transceiver module, see “Connecting a fiber cable.”

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 106 107

No comments

HP HSR6600 Installation Manual Page 50