HP 2500C Series User Manual download pdf (Page 83)

Operating Overview 2-25

139 DEFERRED_ERROR_TRAP Error happened during power up but printer recovered Printer error-trapped in a previous lifetime.

141 NVM_ERR_NOT_INIT Not used Attempt to read/write before init.

142 NVM_ERR_GENERIC Not used Non-specific NVM error.

143 NVM_ERR_DEVICE_ABSENT NVM errors Reset printer =>Replace logic PCA Requested memory device did not respond.

144 NVM_ERR_WRITE NVM errors Reset printer =>Replace logic PCA Protocol error on write operation to NVM.

145 NVM_ERR_READ NVM errors Reset printer =>Replace logic PCA Protocol error on read operation to NVM.

146 NVM_ERR_READBACK NVM errors Reset printer =>Replace logic PCA Failed readback/verify after write.

147 NVM_ERR_DATA_NOT_VALID NVM errors Reset printer =>Replace logic PCA Device works OK.

148 NVM_ERR_UNKNOWN_TAG NVM errors Reset printer =>Replace logic PCA Data tag invalid.

149 NVM_ERR_UNKNOWN_FORMAT NVM errors Reset printer =>Replace logic PCA Chip functions but has invalid format.

151 NVM_ERR_BAD_CHIP_TAG Penhead and cartridge errors –Not used Acumen's chip tag unrecognized.

152 NVM_ERR_BAD_FAMILY Penhead and cartridge errors –Not used Acumen's family ID unrecognized.

153 NVM_ERR_BAD_COLOR Penhead and cartridge errors –Not used Acumen's color code did not match device ID.

154 NVM_ERR_TSR_VALUE Penhead and cartridge errors –Not used Acumen TSR value = 0.

155 NVM_ERR_DROP_VALUE Penhead and cartridge errors –Not used Acumen drop volume = 0.

156 NVM_ERR_BAD_TOKEN Penhead and cartridge errors –Not used Token area failed zero-write self test.

157 NVM_ERR_BAD_WRITE_PROT Penhead and cartridge errors –Not used Write-protect area failed self test.

158 NVM_ERR_BAD_MODEL_NUM Penhead and cartridge errors –Not used Acumen Model Number field out of range.

159 NVM_ERR_INCOMPAT_INK Penhead and cartridge errors –Not used Non-approved bit and "JETSERIES".

161 NVM_ERR_BAD_MFG_WEEK Penhead and cartridge errors –Not used Mfg week > 51.

162 NVM_ERR_SPARE Penhead and cartridge errors –Not used Previously was Gas Gauge Gap.

163 NVM_ERR_POOL_ALLOC_FAIL System recources – Reset printer No memory to allocate pool from.

164 NVM_ERR_ACU_BAD_SIZE Penhead and cartridge errors –Not used Token Write-protected or Scratchpad size = 0.

165 NVM_ERR_DUPLICATE_TAG Penhead and cartridge errors –Not used Two identical tags were found in an Acumen chip.

166 NVM_ERR_TOKEN_MISLOC Penhead and cartridge errors –Not used Status superfield not located in token area.

167 NVM_ERR_I2C_CONF_FAIL

Bus used for connecting devices on the PCA experiences error.

Reset Printer => Replace PCA

A failure was detected on the serial bus used to access NVM

devices (I2C bus). The following extended error codes apply :

001 = STUCK_LO_SDA

002 = STUCK_HI_SDA

004 = STUCK_LO_SCL

005 = STUCK_LO_SCL + STUCK_LO_SDA

006 = STUCK_LO_SCL + STUCK_HI_SDA

008 = STUCK_HI_SCL

009 = STUCK_HI_SCL + STUCK_LO_SDA

010 = STUCK_HI_SCL + STUCK_HI_SDA

Memory Manager

171 MM_PROC_WAITING Not used Memory Manager error traps.

172 MM_SIGNAL_ERR Not used

173 MM_MAX_WAIT_ERR Not used MM debug = 0.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 224 225

Comments to this Manuals

No comments

HP 2500C Series User Manual Page 83

Comments to this Manuals

Related products and manuals for Laser/LED printers HP 2500C Series