HP 2500C Series User Manual download pdf (Page 102)

Loading Paper and Paper Behavior3-8

Paper Behavior

The HP 2500C has an automatic paper size sensing capability. However, paper type

cannot be automatically detected and has to be manually set via the LCD menu. (The

driver selections for paper tray can be: Tray1, Tray2, Tray3, Autoselect or Manual

Feed.)

If PAPER SIZE or TYPE as specified in a print job does not match the LCD setting or

current paper size settings, the printer will respond in different manners. The following

are the various cases which may be encountered :

Print Job Selected Tray 2

1. The printer will check if Tray 2 has the correct Size and Type.

2. If the Type and Size are correct but there is paper media in Tray 1, the printer will

prompt to remove the media from Tray 1.

3. If Tray 1 paper is not removed, all the paper from Tray 1 will be picked and ejected,

followed by a load from Tray 2.

4. If the Tray 2 Size and Type of the media does not match the print job selection:

i. The printer will check Size and Type settings for Tray 3.

ii. If the Tray 3 settings match the print job selection, the printer will load

from Tray 3.

iii. If the Tray 3 settings do not match, the printer will ask the user to load the

correct media Size and Type in Tray 1.

5. If Tray 2 is Out of Paper :

i. The printer will check Size and Type settings for Tray 3

ii. If the Tray 3 settings match the print job selection, the printer will load

from Tray 3.

iii. If the Tray 3 settings do not match the printer will ask to load the correct

media Size and Type in Tray 1.

The same procedure applies to print jobs selecting Tray 3.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 224 225

No comments

HP 2500C Series User Manual Page 102