HP 2500C Series User Manual download pdf (Page 74)

Operating Overview2-16

Using the Control Panel

I/O Menu

Item Value Explanation

IN JOB TIMEOUT=

15

5 to 300 Selects the amount of time (in seconds)

that the printer will wait within a print job

before ending it.

When the data from a print job is not

completely sent to the printer, the printer

will wait for this specified number of

seconds. After that, it will abort the job

and carry on to process the next print job.

Press [ Value ] once to change the setting

by increments of 1 or hold down [ Value ]

to scroll through the settings.

OUT JOB TIMEOUT=

15

0 to 300 Selects the amount of time (in seconds)

that the printer will wait for the next print

job before switching to another port.

This is useful especially when your printer

is connected to two different ports, such as

the parallel port and the network port.

Press [ Value ] once to change the setting

by increments of 1 or hold down [ Value ]

to scroll through the settings.

I/O CHANNEL

TIMEOUT=

120

0 to 300 Selects the amount of time (in seconds)

that the printer will receive data from a

port before switching to the next port.

When the printer is connected to different

ports with simultaneous data being sent

from these ports, the printer will be able to

toggle between ports so that jobs sent

through all ports will be given equal

priority.

Press [ Value ] once to change the setting

by increments of 1 or hold down [ Value ]

to scroll through the settings.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 224 225

Comments to this Manuals

No comments