HP 2500C Series User Manual download pdf (Page 103)

Loading Paper and Paper Behavior 3-9

Paper Behavior

Print Job selected Autoselect

1. The printer will check if Tray 3 has the correct Size and Type.

2. The printer will check if Tray 2 has the correct Size and Type.

3. The printer prompts the user to load correct Size and Type in Tray 1.

4. After the user presses the button, the printer will load from Tray 1.

Print Job selected Manual Feed

§ The printer prompts the user to load correct Size and Type in rear feed slot.

§ When either paper is sensed at the OOPS sensor or the user presses , the printer will

load.

Unexpected Paper Size

§ The OOPS sensor warns the user when the paper is shorter than the page to be

printed.

§ When the user presses the button, the printer loads the next sheet of paper and

prints the remainder of the print job on the next page.

Printer is Idle

§ This condition occurs when the user opens Tray 3 or removes the paper guide.

§ After the user puts back Tray 3 and/or the paper guide, the printer will return to ready

status.

Printer is Printing from Tray 1 or Tray 2

§ This condition occurs when the user opens Tray 3 and/or removes the paper guide

while the printer is printing from tray 1 or tray 2.

§ The printer stops printing and caps the pens, until the user replaces Tray 3 and/or the

paper guide.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 224 225

No comments

HP 2500C Series User Manual Page 103