HP 40cp User Manual download pdf (Page 19)

Removal and replacement procedures 19

Slide the hardware bracket to the right along the busway, completely disconnecting it from the busway

drop box (2).

WARNING: Use caution when removing and replacing the busway drop box. The drop box

weighs approximately 9 kg (20 lb).

5. Rotate the busway drop box 90° so that it is perpendicular to the electrical busway, and then remove

the drop box from the electrical busway (3).

Replacing the busway drop box

WARNING: Use caution when removing and replacing the busway drop box. The drop box

weighs approximately 9 kg (20 lb).

1. Place the silver drop box bracket on the electrical busway where you want to replace the busway drop

box (1).

2. Note the required rotation indicated on the drop box, insert the drop box into the drop box bracket on

the electrical busway, and then rotate the drop box 90° until it locks into place (2).

CAUTION: To prevent damage to the drop box and make sure that the drop box engages

properly, be sure that the drop box is completely flush to the busway. If a drop box is damaged

during installation, do not attempt to re-engage or repair the drop box.

3. Slide the hardware bracket to the left along the busway until it connects to the drop box (3).

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 78 79

No comments

HP 40cp User Manual Page 19