HP 40cp User Manual download pdf (Page 16)

Removal and replacement procedures 16

Fire detection and suppression

The fire detection and suppression system is a "Manufacturer Designed" system specifically for this HP

product, in compliance with national standards.

The HP standard suppression system, supplied as an optional component for the HP POD 40c NA, includes

a Novec 1230 clean agent system. However, if the customer or local AHJ requires specific modifications or

a replacement, HP can assist in these actions at the expense of the customer.

HP does not certify that the fire detection and suppression system that is installed in the HP POD 40c NA

meets all local and jurisdictional requirements. The customer is responsible for the following actions as

related to the fire suppression system:

• Verifying that the POD detection and suppression system meets local codes, including specific local

requirements for initial and periodic inspections

• Arranging for and receiving all required local permits, including initial commissioning as well as

standard and repair maintenance

• Arranging for the connection of the agent tanks, refilling of tanks, and all system testing, including

pressure tests

All general maintenance of the suppression system must be completed by an authorized technician.

• General maintenance of the fire detection and suppression system must be completed by an authorized

technician

For more information, see the HP Performance Optimized Datacenter 40c NA Maintenance and

Service guide.

Additional local requirements are not covered as part of the option price or basic installation and

deployment services, unless specifically included in an executed Statement of Work.

Air filter

There are 2 air filters per cooling zone, for a total of 12 filters.

Tools are not required for installation.

Removing the air filter

1. Pull the locking tabs away from the air filter to release the filter.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 78 79

No comments

HP 40cp User Manual Page 16