HP 40cp User Manual download pdf (Page 39)

Removal and replacement procedures 39

Remove the three screws that secure the fan in the assembly (1), and then partially remove the fan by

pulling it straight out (2).

5. Disconnect the wire.

6. Remove the fan from the assembly.

Replacing the fan

1. Connect the wire.

2. Insert the fan into the assembly and push until the fan is fully seated (1).

3. Secure the fan with three screws (2).

4. Connect the power supplies to the fan power assembly.

5. Return the fan bank to the AUTO mode of operation.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 78 79

No comments

HP 40cp User Manual Page 39