HP ML5590/91 User Manual download pdf (Page 66)

TROUBLESHOOTING > 66

l Your printer driver settings can override any settings from the

printer menu or printer front panel.

Before sending a file to the printer, many word processors send either

an “initialisation string” or an

I-Prime

signal to the printer.

The initialisation string contains codes that override the panel and

menu settings. To change your printer to ignore the reset code, enter

the

Menu Mode

, go to the

Set-Up

group and change the setting for

Reset Inhibit

YES

The I-Prime signal will automatically override any front panel settings

you have made. To eliminate this problem, enter the

Menu Mode

, go

to the

Parallel Interface

group and change the setting for

I-Prime

Invalid

For more information on changing menu settings, see “Changing the

Menu Settings” in chapter 3.

Problem

Nothing happens when I turn ON the printer.

Solution

Check the power cord connection to the outlet and to the printer. If

you are using a power strip, make sure it is turned ON, and that the

fuse hasn’t blown or that the circuit breaker hasn’t tripped.

Problem

The printer does not print when the computer sends data.

Solutions

Is the

SEL

light on? If not, press the

SEL

key.

Check that the interface cable is securely connected to both

the printer and the computer.

If you have the optional serial interface board installed, check

to be sure that it is firmly seated in the printer.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 95 96

Comments to this Manuals

No comments

HP ML5590/91 User Manual Page 66

Comments to this Manuals