HP ML5590/91 User Manual download pdf (Page 38)

MENU MODE > 38

DTR Signal, Default = Ready On Power Up

Appears only when the optional Serial Interface is installed. Change

to Ready On Select if the DTR signal is required when the printer is

selected (leave as Ready On Power Up if the DTR signal is required

when the printer is turned ON).

Emulation Mode, Default = Epson LQ

Selects the printer command set (emulation) you want to enable.

Form Tear-Off, Default = Off

Choose 500 ms, 1 sec., or 2 sec. to turn the Form Tear-Off feature ON

and to set the time interval for the printer to wait before advancing the

paper.

Graphics, Default = Uni-directional

Change to uni-directional graphics for better registration, but slower

printing. With this set for bi-directional, you can optimise the

registration using the Print Registration setting in the Menu.

Graphics Speed, Default = Low

Change to HIGH for faster printing when the optimum print quality is

not an issue.

I-Prime, Default = Buffer Print

Determines what the printer will do when it receives the I-Prime signal

from the software.

Buffer Print

: prints out the buffer contents before resetting.

Buffer Clear

: dumps the buffer contents immediately.

Invalid

: causes the printer to ignore the I-Prime command.

Select this setting if you wish to enter settings through the

printer’s control panel which will not be automatically

overridden by the software’s settings when the I-Prime signal

is sent.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 95 96

No comments

HP ML5590/91 User Manual Page 38