HP ML5590/91 User Manual download pdf (Page 18)

USING YOUR PRINTER > 18

TEMPORARILY CHANGING THE TOP OF FORM

To move the Top of Form position lower for one page only:

Press

SEL

to deselect the printer.

Press

to lower the position of the Top of Form.

RESETTING TOP OF FORM TO THE FACTORY DEFAULT

The factory default setting for the Top of Form (where the printing

should begin) is 1" down from the top of the page.

To reset the Top of Form to the factory default:

Remove paper from the paper path.

Turn the printer off.

Press and hold

PARK

QUIET | TOF

while turning on the

printer.

Reload paper.

FORMS TEAR-OFF FEATURE

This feature is normally turned off. To use Forms Tear-Off, you must

enter the menu and change the setting to the desired time interval

(see “Changing the Forms Tear-Off Settings”).

The Forms Tear-Off feature allows a printed continuous forms page to

be torn off without wasting paper or adjusting the printer. It can be

used for rear feed continuous forms, bottom feed continuous forms

(with the optional push tractor installed), or for top feed roll paper

(with optional roll paper stand installed).

When the printer is turned on, the paper feeds to the tear-off position.

CAUTION!

If you turn the platen knob when the printer is not at Top of Form, the

TOF will misalign. Always feed the paper to TOF before turning the

platen knob.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 95 96

No comments

HP ML5590/91 User Manual Page 18