HP ML5590/91 User Manual download pdf (Page 36)

MENU MODE > 36

Bottom Margin, Default = Valid

Change to Invalid if you want the printer to ignore the bottom margin

setting.

Busy Line, Default = SSD-

Appears only when the optional Serial Interface is installed. If Ready/

Busy protocol (factory default) is selected, you can choose which line

your system monitors for a busy signal:

l SSD -9V, select SSD-

l SSD +9V, select SSD+

l DTR -9V, select DTR

l RTS -9V, select RTS

Busy Time, Default = 200 ms

Appears only when the optional Serial Interface is installed. Sets the

length of the busy signal when the Ready/Busy protocol (factory

default) is engaged.

Busy Time Default = 200ms

Appears only when the optional Serial Interface is installed. Sets the

length of the Busy signal when the Ready/Busy protocol (factory

default) is enabled.

Centering Position, Default = DEFAULT

Used to limit printhead travel when printing narrow columns.

l Select Mode 1 for the narrow carriage printer.

l Select Mode 1 or Mode 2 for the wide carriage printer.

CAUTION!

Setting the Bottom Margin to Invalid can cause loss of data and

damage the printhead by allowing printing without paper.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 95 96

No comments

HP ML5590/91 User Manual Page 36