7–22 361685-001 Service Reference Guide, dx5150
Removal and Replacement Procedures— Small Form Factor (SFF) Chassis
7.10 Power Switch Assembly
1. Prepare the computer for disassembly (Section 7.1, “Preparation for Disassembly”).
2. Remove the front bezel (Section 7.4, “Front Bezel,”).
3. Rotate the drive cage to its full open position.
4. Disconnect the power switch/LED cable from the system board.
5. Squeeze the switch holder retaining clips together at the front of the chassis 1 and push the
switch assembly out of the chassis 2.
To install the power switch assembly, reverse the removal procedure.
Comments to this Manuals