HP dx5150 Technical Information Page 124

  • Download
  • Add to my manuals
  • Print
  • Page
    / 182
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 123
7–30 361685-001 Service Reference Guide, dx5150
Removal and Replacement Procedures— Small Form Factor (SFF) Chassis
7.16 Sys tem B oard
1. Prepare the computer for disassembly (Section 7.1, “Preparation for Disassembly”).
2. Remove the access panel and rotate the computer so the system board is parallel to the table
to make it easier to work on (
Section 7.3, “Computer Access Panel”).
3. Remove the front bezel (Section 7.4, “Front Bezel,).
4. Rotate the drive cage to its full open position.
5. Remove all expansion cards (Section 7.7, “PCI Expansion Card”).
6. Remove the memory modules (Section 7.6, “Memory Modules”).
7. Remove the heatsink (Section 7.14, “Heatsink Assembly”).
8. Remove the processor (Section 7.15, “Processor”).
9. Disconnect all cables connected to the system board, noting their location for reinstallation.
10. Remove the eight screws that secure the system board to the chassis.
11. Slide the board towards the front of the computer for the rear I/O connectors to clear the
chassis then, remove the system board from the chassis.
Ä
CAUTION: When installing a new system board, a new processor backing plate must be
attached to the system board. The heatsink will not attach properly if this plate is not
installed.
Page view 123
1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 181 182

Comments to this Manuals

No comments