HP dx5150 Technical Information Page 115

  • Download
  • Add to my manuals
  • Print
  • Page
    / 182
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 114
Service Reference Guide, dx5150 361685-001 7–21
Removal and Replacement Procedures— Small Form Factor (SFF) Chassis
7.9 Front I/O Devices
1. Prepare the computer for disassembly (Section 7.1, “Preparation for Disassembly”).
2. Remove the front bezel (Section 7.4, “Front Bezel,).
3. Rotate the drive cage to its full open position.
4. Disconnect the two I/O device cables from the system board:
front USB cable pair
front audio cable
5. Remove the power supply from the chassis (Section 7.17, “Power Supply”).
6. From the inside of the chassis, remove the two screws that secure the I/O device to the
chassis 1, then pull the device into the chassis 2 to free it from its mount.
You may need a stubby Torx T15 screwdriver to remove the retaining screws.
To install the housing assembly, reverse the removal procedures.
Page view 114
1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 181 182

Comments to this Manuals

No comments