HP DreamColor Z31x Studio Display User Manual download pdf (Page 49)

● PIP on / o: Allows you to quickly turn the PIP on and o. When disabled this command will be displayed

as “PIP On” and when enabled this command will displayed as “PIP O.”

● Swap primary / secondary: Use this option to quickly swap the primary and secondary inputs. Use of

this option does not require that the PIP be enabled, just that the PIP input be congured. Therefore this

option can be used as another method of quickly switching between two inputs.

● Show display information: This command will display useful display information including display

mode, active color space, display serial number, rmware revision, and backlight hours. This command is

mapped to function button four by default.

● Show color space information: This command will display useful information about the current color

space including the primary coordinates, white point coordinates, and gamma.

● Test pattern generator: This command will display a list of built-in test patterns including black, white,

medium gray, red, green, and blue.

● Empty: This command clears a bezel function key. When selected the label will be blank.

To change the bezel button functions:

1. Press one of the front bezel buttons to display the button labels, and then press the Open Menu button

to open the OSD.

2. In the OSD, select Menu and message control > Congure function buttons and then select one of the

available options for the button you want to recongure.

Changing the bezel function button mode

By default when any bezel button is pressed a menu appears on the screen to the left of the buttons,

indicating the command assigned to each button. When the menu is displayed, you can press the desired

button to execute an assigned command. Once you are familiar with the menu conguration you can disable

the function button label display and simply press the desired bezel button to execute the desired command.

This will only disable the function button label display for the function button commands. Once you have

opened the OSD the function labels will display.

To change the bezel function button mode:

1. Press one of the front bezel buttons to display the button labels, and then press the Open Menu button

to open the OSD. (If you have already switched this mode press on the bottom bezel function button to

open the OSD.)

2. In the OSD, select Menu and message control > Function button mode, and then select one of the

following functions.

a. Select Open button label rst to display the button labels when you press a bezel button.

b. Select Execute command on rst press to instantly execute the assigned command when you

press a bezel button.

Adjusting the bezel button LEDs

The bezel button LEDs have an automatic fade-out feature that is active by default. The LEDs will fade after

the OSD timeout period. You can change the LED behavior so that they do not fade out and you can also adjust

the brightness of the LEDs if the fade-out feature is disabled.

To disable the bezel button fade-out feature:

Customizing bezel buttons 39

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 110 111

No comments

HP DreamColor Z31x Studio Display User Manual Page 49