HP DreamColor Z31x Studio Display User Manual Page 47
- Page / 111
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
How to connect computers to the display
Make the following hardware and cable connections from the computers to the display:
1. Connect a keyboard to the dedicated keyboard port on the display. The keyboard port is rotated 90
degrees from the other ports.
NOTE: For more information about the location of the dedicated keyboard port, see Rear and side
components on page 4.
2. Connect a mouse and any other USB devices you want to share between the two computers to the any of
the other available USB ports on the display.
3. Make a video connection from each computer to the display using video cables (DisplayPort, HDMI, or
USB Type-C).
4. Make a data connection from each computer to the display using one USB Type-B to Type-A cable and
one USB Type-C to Type-A cable. (If you connected a computer using the USB Type-C connection
previously, you will use that same USB Type-C connection for data. No additional connections are
required.)
IMPORTANT: When controlling two dierent computers from the display, make sure the keyboard is
connected to the dedicated keyboard port on the display. The keyboard port is rotated 90 degrees from the
other ports.
How to bind the USB inputs to the video connections
Use the OSD to congure the display to recognize the computers:
1. Press any button on the front bezel.
2. Press the Open Menu button to open the OSD.
3. Select Video input > USB port binding.
4. Use the Up/Down buttons to navigate to the value you want to assign, and then press the Select button.
5. To turn on the KVM: Use the Up/Down buttons to navigate to Bind USB 1 and 2 to specic inputs, and
then press the Select button.
6. To set USB 1 (Type-B) or USB 2 (Type-C) bindings:
a. Use the Up/Down buttons to navigate to the USB-B connection, press the Select button, and then
choose the appropriate video input to bind to the USB-B connection.
b. Use the Up/Down buttons to navigate to the USB-C connection, press the Select button, and then
choose the appropriate video input to bind to the USB-C connection.
To switch between connected computers
▲ To switch between connected computers, press the CTRL + CTRL + Up arrow key combination on the
keyboard connected to the Keyboard port on the display.
On keyboards with LEDs, the Scroll Lock LED will ash after you press the CTRL + CTRL key sequence to
indicate the switch is in progress.
Using the KVM switch 37
- User Guide 1
- About This Guide 3
- Table of contents 5
- 1 Getting Started 11
- Features 12
- Front panel controls 13
- Rear and side components 14
- Setting up the display 15
- Mounting the display 16
- Installing a security cable 18
- Connecting the cables 19
- Adjusting the display 23
- Turning on the display 24
- Connecting USB devices 25
- Removing the display stand 26
- 2 Using the display 27
- Updating the rmware 28
- Adjusting luminance 30
- Video signal adjustments 31
- Overscan the frame 32
- Show only the blue channel 32
- The “Fill To” options 32
- 4096 × 2160 1.85:1 3996 2160 36
- 4096 × 2160 2.39:1 4096 1716 36
- 2048 × 1080 1.85:1 1998 1080 36
- 2048 × 1080 2.39:1 2048 858 36
- Working with markers 39
- 16:9 aspect ratio markers 40
- 4:3 aspect ratio markers 41
- Crosshair markers 42
- Marker color 42
- Custom markers 42
- Marker info element 43
- Marker position element 43
- Marker style element 43
- Custom marker example 44
- Renaming video inputs 45
- Using the KVM switch 46
- Customizing bezel buttons 48
- User presets 50
- Activating a user preset 51
- Automatic input-based presets 52
- Color settings menu 53
- Video input menu 55
- Image adjustment menu 56
- Split/PIP control menu 57
- Load/save user preset 59
- Calibration 59
- Language menu 60
- Management menu 61
- Menu and message control menu 65
- Information 66
- Auto EDID update 67
- 3 Display calibration 68
- Calibration environment 69
- Calibration frequency 70
- User calibration methods 71
- Menu-driven user calibration 72
- White point 73
- Gamma/EOTF 73
- Luminance 73
- StudioCal XML calibration 74
- Calibration automation 74
- Conguration 77
- Usage guidelines 78
- File name and disk format 82
- Declaration 82
- Comments 82
- Root element 82
- Calibration element 83
- Calibration info element 83
- Core calibration tags 83
- Target_primaries 84
- Core calibration tag examples 85
- ICC prole generation 86
- Optional calibration tags 87
- Validation 88
- Validation results le 89
- Archive LUT 90
- Download LUT 90
- Upload LUT 91
- LUT folder structure 92
- Non-calibration elements 95
- 5 Remote management 100
- Setting dashboard security 101
- Navigating the dashboard 103
- Logging out of the dashboard 103
- 6 Support and troubleshooting 104
- Product support 105
- 7 Maintaining the display 106
- A Technical specications 107
- Preset display resolutions 108
- Preset display resolutions 99 109
- Energy saver feature 110
- B Accessibility 111
Related products and manuals for Unknown HP DreamColor Z31x Studio Display
(73 pages)
(12 pages)
(51 pages)
(49 pages)
(112 pages)
(17 pages)
(28 pages)
(49 pages)
(24 pages)
(22 pages)
(21 pages)
(87 pages)© 2020, manymanuals.com. All rights reserved. | 0.248 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals