HP DreamColor Z31x Studio Display User Manual Page 30
- Page / 111
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Selecting a color space preset
The display provides factory calibrated color space presets, suitable for a wide variety of color-critical
workows including visual eects, animation, on-set/dailies viewing, professional photography, product
design, print/pre-press, graphic arts, and many others. Seven industry standard color spaces are provided
along with the display’s native color gamut. The following table provides information on the eight provided
standard color spaces.
Preset
number
Preset name Red primary
(u’v’)
Green
primary (u’v’)
Blue primary
(u’v’)
White
point
Default gamma or
EOTF
Default
luminance
0 DCI P3 D65 0.496, 0.526 0.099, 0.578 0.175, 0.158 D65 2.4
100 cd/m
2
1 BT.709 0.451, 0.523 0.125, 0.563 0.175, 0.158 D65 BT.1886
100 cd/m
2
2 BT.2020 0.557, 0.516 0.056, 0.587 0.159, 0.126 D65 BT.1886
100 cd/m
2
3 sRGB D65 0.451, 0.523 0.125, 0.563 0.175, 0.158 D65 sRGB
250 cd/m
2
4 sRGB D50 0.451, 0.523 0.125, 0.563 0.175, 0.158 D50 sRGB 250 cd/m²
5 Adobe RGB D65 0.451, 0.523 0.076, 0.576 0.175, 0.158 D65 2.2
250 cd/m
2
6 Adobe RGB D50 0.451, 0.523 0.076, 0.576 0.175, 0.158 D50 2.2
250 cd/m
2
7 Native Panel Panel Panel D65 2.2
250 cd/m
2
NOTE: The factory DCI-P3 preset has a D65 white point, a 100 cd/m² luminance and a Power 2.4 gamma.
This diers from the DCI-P3 conguration typically found in cinema projectors (P3 white point, a 48 cd/m²
luminance and a Power 2.6 gamma). This is because consultation with visual eect and animation studios
determined that the D65/100/2.4 conguration was better suited to the typical artist work environment than
the cinema projector conguration.
To select a color space preset:
1. Press any Function button on the front bezel.
2. Press the Open Menu button to open the OSD.
3. Select Color settings to display the color space conguration screen.
4. Use the Up/Down buttons to navigate to the desired color space, and then press the Select button to
activate it.
Adjusting luminance
Though each preset is calibrated to a specic luminance level, the luminance can be adjusted post-calibration.
The luminance range for all calibrated color space presets can be adjusted from 48–250 cd/m
2
.
NOTE: Due to the way LEDs respond to voltage, the further you adjust luminance away from the calibrated
value, the less accurate the luminance value reported by the OSD will be. As you move away from the
calibrated value, the colorimetry of the white point will shift. HP recommends that you calibrate the display to
the desired working luminance. For more information about calibration, see Display calibration on page 58.
To adjust luminance:
1. Press any Function button on the front bezel.
2. Press the Open Menu button to open the OSD.
20 Chapter 2 Using the display
- User Guide 1
- About This Guide 3
- Table of contents 5
- 1 Getting Started 11
- Features 12
- Front panel controls 13
- Rear and side components 14
- Setting up the display 15
- Mounting the display 16
- Installing a security cable 18
- Connecting the cables 19
- Adjusting the display 23
- Turning on the display 24
- Connecting USB devices 25
- Removing the display stand 26
- 2 Using the display 27
- Updating the rmware 28
- Adjusting luminance 30
- Video signal adjustments 31
- Overscan the frame 32
- Show only the blue channel 32
- The “Fill To” options 32
- 4096 × 2160 1.85:1 3996 2160 36
- 4096 × 2160 2.39:1 4096 1716 36
- 2048 × 1080 1.85:1 1998 1080 36
- 2048 × 1080 2.39:1 2048 858 36
- Working with markers 39
- 16:9 aspect ratio markers 40
- 4:3 aspect ratio markers 41
- Crosshair markers 42
- Marker color 42
- Custom markers 42
- Marker info element 43
- Marker position element 43
- Marker style element 43
- Custom marker example 44
- Renaming video inputs 45
- Using the KVM switch 46
- Customizing bezel buttons 48
- User presets 50
- Activating a user preset 51
- Automatic input-based presets 52
- Color settings menu 53
- Video input menu 55
- Image adjustment menu 56
- Split/PIP control menu 57
- Load/save user preset 59
- Calibration 59
- Language menu 60
- Management menu 61
- Menu and message control menu 65
- Information 66
- Auto EDID update 67
- 3 Display calibration 68
- Calibration environment 69
- Calibration frequency 70
- User calibration methods 71
- Menu-driven user calibration 72
- White point 73
- Gamma/EOTF 73
- Luminance 73
- StudioCal XML calibration 74
- Calibration automation 74
- Conguration 77
- Usage guidelines 78
- File name and disk format 82
- Declaration 82
- Comments 82
- Root element 82
- Calibration element 83
- Calibration info element 83
- Core calibration tags 83
- Target_primaries 84
- Core calibration tag examples 85
- ICC prole generation 86
- Optional calibration tags 87
- Validation 88
- Validation results le 89
- Archive LUT 90
- Download LUT 90
- Upload LUT 91
- LUT folder structure 92
- Non-calibration elements 95
- 5 Remote management 100
- Setting dashboard security 101
- Navigating the dashboard 103
- Logging out of the dashboard 103
- 6 Support and troubleshooting 104
- Product support 105
- 7 Maintaining the display 106
- A Technical specications 107
- Preset display resolutions 108
- Preset display resolutions 99 109
- Energy saver feature 110
- B Accessibility 111
Related products and manuals for Unknown HP DreamColor Z31x Studio Display
(73 pages)
(12 pages)
(51 pages)
(49 pages)
(112 pages)
(17 pages)
(28 pages)
(49 pages)
(24 pages)
(22 pages)
(21 pages)
(87 pages)© 2020, manymanuals.com. All rights reserved. | 0.407 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals