Hp XP P9500 Storage User Manual download pdf (Page 56)

• Data for the selected volume displays in the P-VOL box. The numbers indicate the volume

port, GID, LUN, and volume

• One P-VOL displays at a time, even if you selected multiple volumes for pairing. The

volume with the lowest number displays first.

5. Specify an S-VOL.

• To create one pair, select the port, GID, and LUN from the three S-VOL boxes. If you

selected multiple volumes as P-VOLs, the S-VOL you specify is paired with the P-VOL

displayed in P-VOL.

• If you selected multiple volumes as P-VOLs and want to create multiple pairs, do one of

the following using the Select Other S-VOL(s) list to assign S-VOLs:

- Select Increment to add the secondary system LUN incrementally. Your S-VOL LUN

numbers must be numbered incrementally. For example, if you create three pairs and

specify 011 on the LUN of P-VOL, the LUNs on the secondary system are incremented

at 011, 012, and 013.

- Select Input Next to specify S-VOL LUNs one at a time for each P-VOL. For example, set

the S-VOL LUN for the current P-VOL and click Set, then reopen the dialog box to set the

next S-VOL, and so on.

- Select Relative to P-VOL to add the S-VOL LUN closest to the P-VOL’s LUN. For example,

if the LUN of the three P-VOLs are 001, 005, and 006, and you select LUN 002 for the

first S-VOL, LUN numbers 006 and 007 are assigned by the system as the next two

S-VOLs.

6. In the Mirror box, proceed as follows.

1. Select the master journal from the M-JNL list.

56 Pair operations

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 191 192

No comments

Hp XP P9500 Storage User Manual Page 56