Hp Unified Extensible Firmware Interface User Manual download pdf (Page 79)

Figure 70 BIOS Serial Console and EMS screen

Setting BIOS Serial Console Port

You can re-direct video and keystrokes through the serial port to OS boot. This option can interfere

with non-terminal devices attached to the serial port. In this case, set this option to “Disabled.”

IMPORTANT: This option is not supported under RBSU on Japanese or Simplified Chinese systems.

To set the BIOS serial console port:

1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration

(RBSU)→BIOS Serial Console and EMS and select BIOS Serial Console Port and press Enter.

2. Select one of the following options:

• Auto

• Disabled (default for older servers)

• Physical Serial Port

• Virtual Serial Port

3. Press F10 to save your selection.

NOTE: Connect a null modem cable to the serial port/COM port on which BIOS Serial Console

is enabled.

Accessing the BIOS/Platform Configuration (RBSU) menu 79

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 157 158

No comments

Hp Unified Extensible Firmware Interface User Manual Page 79