Hp Unified Extensible Firmware Interface User Manual download pdf (Page 42)

Figure 33 Boot Mode screen

Setting UEFI Optimized Boot

Configure the system to use native UEFI graphic drivers when booting to the UEFI Boot Mode. This

option needs to be enabled to configure Secure Boot. For more information, see “Configuring

Secure Boot” (page 69) for more information. Set the Boot Mode to UEFI before you can configure

this option. See “Selecting a Boot Mode” (page 41) for detailed information.

NOTE: This option must be disabled, when using Microsoft Windows 2008 R2 in UEFI Boot

Mode because Legacy BIOS components are needed for video operations in Windows.

To set the UEFI Optimized Boot:

1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration

(RBSU)→Boot Options→UEFI Optimized Boot and press Enter. The UEFI Optimized Boot screen

appears.

2. Select one of the following options:

• Enabled—Configures the system BIOS to boot using native UEFI graphic drivers.

• Disabled (default)—Configures the system BIOS to boot using INT10 legacy video

expansion ROM. This setting needs to be disabled to boot Windows Server 2008 R2 in

UEFI Boot Mode. This option cannot be disabled if Secure Boot is enabled. Configure

this option only if Boot Mode is set to UEFI. For more details, see “Selecting a Boot Mode”

(page 41).

3. Press F10 to save your selection.

4. Reboot the server for the change to take effect.

42 Accessing the System Configuration Menu

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 157 158

No comments

Hp Unified Extensible Firmware Interface User Manual Page 42