Hp Unified Extensible Firmware Interface User Manual download pdf (Page 31)

Figure 21 UEFI Shell Options — Embedded UEFI Shell screen

Adding Embedded UEFI Shell to the boot order list

Adding the Embedded UEFI Shell as an entry in the Boot Order list is only applicable when the

Embedded UEFI Shell is enabled and Boot Mode is set as UEFI. Otherwise, this option is grayed

out.

NOTE: When enabling this option, the Embedded UEFI Shell does not appear in the UEFI Boot

Order list until the next system reboot.

To add the Embedded UEFI Shell to the boot order list:

1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration

(RBSU)→System Options→UEFI Shell Options→Add Embedded UEFI Shell to Boot Order and

press Enter.

2. Select one of the following options:

• Enabled (default)—Adds the embedded UEFI Shell to the boot order.

• Disabled

3. Press F10 to save your selection.

Accessing the BIOS/Platform Configuration (RBSU) menu 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 157 158

No comments

Hp Unified Extensible Firmware Interface User Manual Page 31