Hp Unified Extensible Firmware Interface User Manual download pdf (Page 32)

Figure 22 UEFI Shell Options — Add Embedded UEFI Shell to the Boot Order screen

Enabling the UEFI Shell Script Auto Start

You can enable or disable automatic execution of the default UEFI Shell startup script during shell

startup. When enabled, the shell looks for the startup.nsh file in any of the FAT16 or FAT32

file systems available. If you do not have the startup.nsh file, name the script file “startup.nsh”

and place it in a UEFI accessible file system on a fixed or removable media. Configure this option

only when Boot Mode is set to UEFI. HP recommends that you have only one startup.nsh file

on one file system. See “Selecting a Boot Mode” (page 41) for more information.

To enable the UEFI Shell script auto start:

1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration

(RBSU)→System Options→UEFI Shell Options→UEFI Shell Script Auto-Start and press Enter.

2. Select Enabled and press Enter to enable the UEFI Shell Script Auto Start.

3. Press F10 to save your selection.

4. Reboot the server for the change to take effect.

32 Accessing the System Configuration Menu

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 157 158

No comments

Hp Unified Extensible Firmware Interface User Manual Page 32