HP rp7410 User's Guide download pdf (Page 209)

NOTE: You can use Partition Manager to power on or off inactive cells.

You cannot power off active cells. To power on or off cells assigned to a remote nPartition when

using Partition Manager, you must use Partition Manager Version 2.0 remote administration

features.

1. Access Partition Manager.

For details on accessing Partition Manager or other tools, see “Tools for Managing Hardware”

(page 201).

2. Select the cell or I/O chassis you want to power on or off.

In Partition Manager Version 1.0, select the nPartition containing the item you want to power

on or off, then select the item.

In Partition Manager Version 2.0, select the cell (or I/O chassis) that you want to power on

or off.

3. Select the Partition Manager action to power on or off the selected item.

Select the Cell→P ower On Cell action, or select the Cell→Power Off Cell action. If powering

on or off an I/O chassis, instead use the I/O→Power On... or I/O→Power Off... actions.

4. Exit Partition Manager.

From Partition Manager Version 1.0, select the File→Exit action.

From Partition Manager Version 2.0, select Log off parmgr or exit the Web browser when

finished.

Turning Attention Indicators (LEDs) On and Off

You can turn hardware attention indicators (LEDs) on or off by using any one of the following

procedures:

• “Turning Attention Indicators On and Off (nPartition Commands)” (page 210)

• “Turning Attention Indicators On and Off (Partition Manager)” (page 212)

HP's nPartition systems provide attention indicators (LEDs) to help you to visually select and

confirm which hardware you want to perform operations on. Attention indicators are amber

(orange) lights.

Table 7-2 lists the meanings for the various attention indicator states. When all components of a

system are functioning and no service operations are occurring, every attention indicator should

be turned off. (HP Superdome cabinet number LCDs remain lit or blinking when cabinet power

is on.)

Table 7-2 Attention Indicator (LED) States and Meanings

MeaningAttention Indicator State

Not selected.OFF

Selected to be used in a service operation.BLINKING

Supported for PCI card slot LEDs only.

Service required, problems have been identified with the component.

LEDs for Hardware Components You can control (turn off, blink, and/or turn on) attention

indicators for the following hardware components.

• Cell LEDs Each cell or cell slot has its own attention indicators.

Turning Attention Indicators (LEDs) On and Off 209

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 265 266

No comments

HP rp7410 User's Guide Page 209