HP rp7410 User's Guide download pdf (Page 115)

To exit the ISL prompt and return to the BCH interface, issue the EXIT command instead

of specifying one of the hpux loader commands.

Refer to the hpux(1M) manpage for a detailed list of hpux loader options.

Example 5-1 Single-User HP-UX Boot

ISL Revision A.00.42 JUN 19, 1999

ISL> hpux -is /stand/vmunix

Boot

: disk(0/0/2/0/0.13.0.0.0.0.0;0)/stand/vmunix

8241152 + 1736704 + 1402336 start 0x21a0e8

....

INIT: Overriding default level with level 's'

INIT: SINGLE USER MODE

INIT: Running /sbin/sh

4. Exit the console and management processor interfaces if you are finished using them.

To exit the BCH environment, press ^B (Control-B); this exits the nPartition console and

returns to the management processor Main Menu. To exit the management processor, type

X at the Main Menu.

Procedure 5-11 Single-User Mode HP-UX Booting (EFI Shell)

From the EFI Shell environment, boot in single-user mode by stopping the boot process at the

HPUX.EFI interface (the HP-UX Boot Loader prompt, HPUX>) entering the boot -is vmunix

command. The EFI Shell is available only on HP Integrity servers.

Refer to “ACPI Configuration for HP-UX Must Be default” (page 110) for required configuration

details.

1. Access the EFI Shell environment for the nPartition on which you want to boot HP-UX in

single-user mode.

the nPartition console.

When accessing the console, confirm that you are at the EFI Boot Manager menu (the main

EFI menu). If you are at another EFI menu, choose the Exit option from the submenus until

you return to the screen with the EFI Boot Manager heading.

From the EFI Boot Manager menu, choose the EFI Shell menu option to access the EFI Shell

environment.

2. Access the EFI System Partition (fsX: where X is the file system number) for the device

from which you want to boot HP-UX.

3. When accessing the EFI System Partition for the desired boot device, issue the HPUX command

to initiate the \EFI\HPUX\HPUX.EFI loader on the device you are accessing.

4. Boot to the HP-UX Boot Loader prompt (HPUX>) by pressing any key within the 10 seconds

given for interrupting the HP-UX boot process. You will use the HPUX.EFI loader to boot

HP-UX in single-user mode in the next step.

After you press any key, the HPUX.EFI interface (the HP-UX Boot Loader prompt, HPUX>)

is provided. For help using the HPUX.EFI loader, enter the help command. To return to

the EFI Shell, enter exit.

Booting and Shutting Down HP-UX 115

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 265 266

No comments

HP rp7410 User's Guide Page 115