HP rp7410 User's Guide download pdf (Page 175)

# parmodify -p1 -P "hostname05"

Command succeeded.

# parmodify -p1 -r0/4 -r0/6

Command succeeded.

# parmodify -p1 -b 4/0/1/0/0.9

Command succeeded.

When each modification takes place, parmodify reports "Command succeeded". Otherwise

it reports any problems.

You can specify each configuration option on a separate command line or can combine all

options into a single, longer command line.

For details on the various options for modifying nPartition settings, refer to the parmodify(1M)

manpage.

4. Use the parstatus -V -p# command to list all details about your newly created and

configured nPartition.

If any configuration details need to be modified, use the parmodify command before you

boot the nPartition in the next step.

# parstatus -V -p1

[Partition]

Partition Number : 1

Partition Name : hostname05

Status : inactive

IP address :

Prmary Boot Path : 4/0/1/0/0.9

ALternate Boot Path : 0/0/0/0/0/0/0/0.0.0

HA Alternate Boot Path : 0/0/0/0/0/0/0/0.0.0

PDC Revision : 104.1

IODCH Version : 23664

CPU Speed : 552 MHz

Core Cell : ?

Core Cell Alternate :

0. cab0,cell4

1. cab0,cell6

[Cell]

CPU Memory Use

OK/ (GB) Core On

Hardware Actual Failed/ OK/ cell Next Par

Location Usage Max Failed Connected To Capable Boot Num

========== ============ ======= ========= =================== ======= ==== ===

cab0,cell4 inactive 4/0/4 2.0/ 0.0 cab 0,bay0,chassis3 yes yes 1

cab0,cell6 inactive 4/0/4 2.0/ 0.0 cab 0,bay1,chassis1 yes yes 1

....

5. Boot your newly-created nPartition past boot-is-blocked to make it active and make its

system boot environment available.

(The BCH environment is provided on HP 9000 servers; the EFI environment is provided

on HP Integrity servers.)

Use the BO command at the service processor Command menu to boot the nPartition.

Once the nPartition is booted, you can access its system boot environment through its console.

Use the service processor Console menu (enter CO at the service processor Main Menu).

Procedure 6-3 Creating a New nPartition (Partition Manager)

You can create a new nPartition by using Partition Manager.

When using Partition Manager Version 1.0, use the Partition→Create Partition action.

When using Partition Manager Version 2.0, use the nPartition→Create nPartition action.

1. Access Partition Manager.

For details on accessing Partition Manager or other tools, see “Tools for Configuring

nPartitions” (page 165).

Creating a New nPartition 175

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 265 266

Comments to this Manuals

No comments

HP rp7410 User's Guide Page 175

Comments to this Manuals

Related products and manuals for Software HP rp7410