Hard drive/solid-state drive (2.5 inch)
NOTE: 2.5-inch hard drives are only available on models with a 4-cell battery.
Description Spare part number
2 TB, 5400 rpm, hard drive 912487-850
2 TB, 5400 rpm hard drive, hybrid 8 GB SSD 929167-850
1 TB, 7200 rpm, hard drive L06427-850
1 TB, 5400 rpm hard drive, hybrid 8 GB SSD 924036-850
1 TB, SATA, TLC, solid-state drive L28686-001
500 GB, 7200 rpm, hard drive 703267-001
500 GB, 7200 rpm, FIPS-140-2, hard drive 820572-001
500 GB, 7200 rpm, , hard drive, self-encrypting drive (SED) 820573-001
500 GB, 5400 rpm hard drive, hybrid 8 GB SSD 732000-001
256 GB, SATA, TLC, solid-state drive L28687-001
Hard drive bracket, touch and non-touch models L28674-001 (Bracket Kit)
L33681-001 (Hard Drive
Hardware Kit)
Before removing the hard drive, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see Bottom cover on page 33).
5. Remove the battery (see Battery on page 35).
Remove the hard drive:
1. Remove the four Phillips M2.0×2.0 screws (1) that secure the hard drive assembly to the computer.
42 Chapter 5 Removal and replacement procedures for authorized service provider parts
Comments to this Manuals