6. Loosen the 3 hard drive screws (1). Open the hard drive latch (2), and then remove the cover (3).
7. Lift the hard drive (3), and then pull the hard drive out of the hard drive bay.
Installing a hard drive
NOTE: Your computer may look slightly different from the illustration in this section.
To install the hard drive:
1. Insert the hard drive into the hard drive bay at an angle (1), and then lay the hard drive flat in the hard
drive bay.
2. Close the hard drive latch (2) to engage the hard drive with the connector.
3. Tighten the hard drive screws (3).
64 Chapter 8 Drives ENWW
Comments to this Manuals