HP ZBook 17 G2 Mobile Workstation (ENERGY STAR) User Manual download pdf (Page 33)

You may need the HP Mobile Broadband Module serial number to activate mobile broadband service. The

serial number is printed on a label inside the battery bay of your computer.

Some mobile network operators require the use of a SIM. A SIM contains basic information about you, such as

a personal identification number (PIN), as well as network information. Some computers include a SIM that is

preinstalled in the battery bay. If the SIM is not preinstalled, it may be provided in the HP Mobile Broadband

information provided with your computer or the mobile network operator may provide it separately from the

computer.

For information about inserting and removing the SIM, see

Inserting and removing a SIM on page 23 in this

chapter.

For information about HP Mobile Broadband and how to activate service with a preferred mobile network

operator, see the HP Mobile Broadband information included with your computer.

Inserting and removing a SIM

CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM.

To insert a SIM, follow these steps:

1. Turn off the computer by using the Shut down command.

2. Close the display.

3. Disconnect all external devices connected to the computer.

4. Unplug the power cord from the AC outlet.

5. Turn the computer upside down on a flat surface, with the battery bay toward you.

6. Remove the battery.

7. Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.

NOTE: The SIM in your computer may look slightly different from the illustration in this section.

NOTE: See the image on the battery bay to determine which way the SIM card should be inserted into

your computer.

ENWW Connecting to a wireless network 23

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 119 120

No comments

HP ZBook 17 G2 Mobile Workstation (ENERGY STAR) User Manual Page 33