33. Disconnect the display logo LED board cable (3) from the display panel cable.
34. Remove the display panel. The display panel is available using the following spare
part numbers:
●
480441-001 (17.0-inch, WSXGA+ BrightView display panel)
●
480440-001 (17.0-inch, WXGA BrightView display panel)
35. If it is necessary to replace the display hinges, remove the four Phillips PM2.0×4.0 screws (1) that
secure each display hinge to the display panel.
36. Remove the display hinges (2). The display hinges are available using spare part number
480448-001.
37. If it is necessary to replace the wireless antenna transceivers and cables, remove the Phillips
PM2.5×4.0 screw (1) that secures each transceiver to the display enclosure.
38. Detach the wireless antenna transceivers (2) from the display enclosure.
Component replacement procedures 83
Comments to this Manuals