HP dv7-6c20us Technical Information download pdf (Page 78)

Before removing the memory module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 54).

5. Remove the accessory cover (see

Hard drive on page 59).

Remove the memory module:

1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory

module. (The edge of the module opposite the slot rises away from the computer.)

2. Remove the module (2) by pulling it away from the slot at an angle.

NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the

memory module slot.

Reverse this procedure to install a memory module.

68 Chapter 4 Removal and replacement procedures

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 185 186

No comments

HP dv7-6c20us Technical Information Page 78