HP dv7-6c20us Technical Information download pdf (Page 79)

Switch cover

NOTE: The switch cover includes the power button board and cable and LED board and cable.

Description Spare part number

For use only with computer models equipped with AMD processors 480469-001

For use only with computer models equipped with Intel processors 485605-001

Before removing the switch cover, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 54).

Remove the switch cover:

1. Remove the following screws:

(1) Seven Phillips PM2.5×4.0 screws

(2) One Phillips PM2.5×13.0 screw

2. Turn the computer display-side up, with the front toward you.

3. Open the computer as far as possible.

4. Lift the rear edge of the switch cover (1) until it rests at an angle.

Component replacement procedures 69

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 185 186

No comments

HP dv7-6c20us Technical Information Page 79