HP dv7-6c20us Technical Information download pdf (Page 66)

Webcam/microphone module

NOTE: This section applies only to computer models equipped with BrightView display assemblies.

NOTE: If it has been determined that the webcam/microphone module is the component that must be

replaced to complete the computer repair, the display assembly does not have to be removed. Follow

the procedures in this section to replace the webcam/microphone module. For information on replacing

the display assembly and other display assembly internal components, see

Display assembly

on page 76.

Description Spare part number

Webcam/microphone module 480446-001

Before removing the webcam/microphone module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 54).

Remove the webcam/microphone module:

1. Turn the computer display-side up, with the front toward you.

2. Open the computer as far as possible.

3. Flex the inside edges of the top edge (1) and the left and right upper corners (2) of the display bezel

until the bezel disengages from the display enclosure.

4. Release the display bezel top edge (3) from the display enclosure.

56 Chapter 4 Removal and replacement procedures

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 185 186

No comments

HP dv7-6c20us Technical Information Page 66