HP Elite Slice for Meeting Rooms G2 for Intel Unite User Manual download pdf (Page 19)

Attaching the product to a mounting device

If the VESA Plate, available as an option, is connected, the product can be attached to a table.

To mount the product:

1. Connect all modules except the VESA Plate.

2. Use the four screws provided with the VESA Plate to attach the VESA Plate to a table or other surface.

3. Carefully connect the modules to the VESA Plate.

4. Slide the quick release latch on the rear of the VESA Plate to the locked position to secure the VESA Plate

to the module above it.

NOTE: HP highly recommends that you secure the assembly by attaching a security cable to the rear of

the VESA Plate. This stops the quick release latch from being moved to the unlocked position and

prevents accidental release of the modules.

The security cable is designed to act as a deterrent, but it may not prevent the device from being

mishandled or stolen.

Installing a security cable (optional)

The optional 10 mm ultra-slim cable lock displayed below can be used to secure modules stacked together. A

security cable lock can be connected to the base module, the Video Ingest module, the Wireless Display

module, or the VESA Plate. When installed in the bottom module, the cable locks all modules together. If the

VESA Plate is installed, slide the quick release to the locked position and install a security cable (1) to lock all

modules together. Use the key (2) provided to lock and unlock the security cable.

Attaching the product to a mounting device 11

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 53 54

No comments

HP Elite Slice for Meeting Rooms G2 for Intel Unite User Manual Page 19