HP Elite Slice for Meeting Rooms G2 for Intel Unite User Manual download pdf (Page 20)

NOTE: The security cable is designed to act as a deterrent, but it may not prevent the device from being

mishandled or stolen.

Connecting AC power

The HP Cable and Port Cover supplies power to the elements of the conferencing solution.

1. Connect the Cable and Port Cover to the base module:

a. Pull the port cover (1) down to expose the cable connectors.

b. Pull the rst and last connectors (2) back and then out to each side.

c. Beginning with the HDMI connector and nishing with the NIC connector, plug all middle connectors

(1) into the rear ports on the base module.

d. Connect the rst connector (2) and last connector (3).

e. Push the port cover (4) back over the cable connectors to protect and secure the connectors.

2. Connect remaining equipment, such as a CoRC or a monitor, to the Cable and Port Cover.

3. Connect the AC power cord to the AC adapter (1) and the other end to an AC outlet (2).

12 Chapter 2 Setup

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 53 54

No comments

HP Elite Slice for Meeting Rooms G2 for Intel Unite User Manual Page 20