2 Setup
Connecting or removing modules
Additional modules may be attached to the base module in the following order, from top to bottom:
● Video Ingest Module (required for the Microsoft SRS only)
● Wireless Display Module (optional)
● ODD Module (optional)
● VESA Plate (optional)
Connecting modules
IMPORTANT: Before connecting modules, turn o the base module and disconnect it from any AC power
source.
Modules cannot be “hot-plugged” or “hot-swapped.”
1. Remove/disengage the security cable, if one is attached.
2. Remove all removable media, such as USB ash drives.
3. Turn o the base module properly through the operating system, and then turn o any external devices.
4. Disconnect the AC power cord from the base module and disconnect any external devices.
5. If the VESA Plate is connected, slide the quick release latch to the unlocked position and remove the
VESA Plate.
Connecting or removing modules 7
Comments to this Manuals