HP Elite Slice for Meeting Rooms G2 for Intel Unite User Manual download pdf (Page 37)

Upgrading system memory

The memory module slots on the system board can be populated with up to two industry-standard memory

modules. At least one small outline, dual inline memory module (SODIMM) is preinstalled. To achieve the

maximum memory support, you can populate the system board with up to 32 GB (16 GB x 2) of memory.

NOTE: Dual channel memory is recommended for Microsoft SRS for better performance.

Memory module specications

For proper system operation, the SODIMMs must adhere to the following specications:

● Industry-standard 288-pins

● Unbuered non-ECC PC4-17000 DDR4-2133 MHz-compliant

● 1.2 volt DDR4-SDRAM SODIMMs

● Support CAS latency 15 DDR4 2400 MHz (15-15-15 timing)

● Contain the mandatory Joint Electronic Device Engineering Council (JEDEC) specication

The product supports the following:

● 512-Mbit, 1-Gbit, and 2-Gbit non-ECC memory technologies

● Single-sided and double-sided SODIMMs

● SODIMMs constructed with x8 and x16 devices

NOTE: To avoid compatibility issues, HP recommends that you use only HP memory modules in this product.

The system will not operate properly if you install unsupported DIMM memory. DIMMs constructed with x4

SDRAM are not supported.

Upgrading system memory 29

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 53 54

No comments

HP Elite Slice for Meeting Rooms G2 for Intel Unite User Manual Page 37