HP ProCurve 9315M User Manual download pdf (Page 51)

Software Fixes Release Notes for 07.8.04

59279 If supernet routes are used and the IP Routing

feature is configured, the CAM entry of a child route

sometimes gets aged out, leaving the CAM entry of

parent route programmed. This can cause

misforwarding of traffic.

IP Routing 07.8.02

59502 A system reload is sometimes performed if the IP

Routing feature configured when the system runs

out of IP cache entries and frees an existing entry.

IP Routing 07.8.02

60525 A system reload is sometimes performed if the IP

Routing feature configured if the outbound interface

used to forward IP traffic is invalid.

IP Routing 07.8.02

64091 Entering the show flash command over a Telnet

connection to a routing switch may cause a system

reload.

System 07.8.02

64230 If the Multicast Source Discovery Protocol (MSDP)

and BGP are configured, the TCP pool can

sometimes be corrupted by MSDP and cause a

system reload.

IP Routing 07.8.02

64339 If OSPF is configured, when an Equal-Cost Multi-

Path (ECMP) route is received with an overlapping

route in the route table, the ECMP route is not

added to the IP route table.

IP Routing 07.8.02

64605 If a tag type is configured and you delete the tag

type using the no tag-type command, the tag-type

value is not checked.

System 07.8.02

64621 If the authentication, authorization, and accounting

(AAA) feature is configured using a RADIUS server

as the default, you must press “CR” key twice after

you enter a password to gain access to the switch.

AAA 07.8.02

64910 If VSRP is configured, the number of active ports

does not include the lowest numbered port. You

must disable the port and then re-enable it in order

for the correct number of active VSRP ports to be

used. This action may result in a loss of

connectivity.

VSRP 07.8.02

64961 A system reload may occur when packets that

match a Layer 3 CAM entry are sent to the

processor.

System 07.8.02

65231 On an EP 16-Port 10/1000-T module, a Gigabit

interface does not exchange 802.3x flow control

capability in auto-negotiation mode with a link

partner.

System 07.8.02

65286 When you start an outbound Telnet session on a

routing switch, the switch incorrectly uses the “CR”

character instead of the key sequence “CR NULL”.

System 07.8.02

Bug ID Bug Description Protocol/

Feature

Version

Found

Version

Fixed

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 65 66

Comments to this Manuals

No comments

HP ProCurve 9315M User Manual Page 51

Comments to this Manuals

Related products and manuals for Network switch modules HP ProCurve 9315M