HP CP4025DN User Manual Page 85

  • Download
  • Add to my manuals
  • Print
  • Page
    / 282
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 84
Install the product on a wired network
Configure the IP address
1. Connect the network cable to the product and to the network.
2. Wait for 60 seconds before continuing. During this time, the network recognizes the product and
assigns an IP address or host name for the product.
3. At the product control panel, press the Home button
.
4. Press the down arrow
to highlight the INFORMATION menu, and then press the OK button.
5. Press the down arrow
to highlight the PRINT CONFIGURATION menu, and then press the
OK button.
6. Find the IP address on the Embedded Jetdirect page.
HP Color LaserJet CP4525 Printers
Embedded Jetdirect Page
7. IPv4: If the IP address is 0.0.0.0, or 192.0.0.192, or 169.254.x.x, you must manually configure the
IP address. See
Manually configure IPv4 TCP/IP parameters from the control panel
on page 75. Otherwise, the network configuration was successful.
IPv6: If the IP address begins with "fe80:", the product should be able to print. If not, you must
manually configure the IP address. See
Manually configure IPv6 TCP/IP parameters from the
control panel on page 76.
ENWW Connect to a network 71
Page view 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 281 282

Comments to this Manuals

No comments