HP CP4025DN User Manual download pdf (Page 46)

I/O menu

Items on the I/O (input/output) menu affect the communication between the product and the computer.

If the product contains an HP Jetdirect print server, you can configure basic networking parameters by

using this submenu. You can also configure these and other parameters through HP Web Jetadmin or

the embedded Web server.

For more information on these options, see

Connect to a network on page 68.

To display: Press the Home button

, select the CONFIGURE DEVICE menu, and then select the I/

O menu.

NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no

default.

Item Sub-item Values Description

I/O TIMEOUT Range: 5 - 300 Allows you to set the product I/O

TIMEOUT in seconds. The default

is 15 seconds.

Use this setting to adjust timeout

for the best performance. If data

from other ports appears in the

middle of your print job, increase

the timeout value.

EMBEDDED JETDIRECT MENU See the next table for a list of options.

Table 2-1 Embedded Jetdirect menu

Item Sub-item Sub-item Sub-item Description

INFORMATION PRINT SEC PAGE YES*

YES: Prints a page that contains the current

security settings on the HP Jetdirect print

server.

NO: A security settings page is not printed.

TCP/IP ENABLE ON*

OFF

ON: Enable the TCP/IP protocol.

OFF: Disable the TCP/IP protocol.

HOST NAME An alphanumeric string, up to 32 characters,

used to identify the product. This name is

listed on the HP Jetdirect configuration page.

The default host name is NPIxxxxxx, where

xxxxxx is the last six digits of the LAN

hardware (MAC) address.

32 Chapter 2 Control panel menus ENWW

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 281 282

No comments

HP CP4025DN User Manual Page 46